Wednesday, March 27, 2013

It's Party Time with Imaginisce and Xyron!


There is nothing better than a Handmade Party! And today I am going to show you how to make a super cute Party Hat for your Birthday boy and some little party favor boxes to match using Imaginisce paper and embellishments along with my favorite adhesive, Xyron.





Let me show you how I constructed my Party Hat!

Start by cutting three 12x4 inch strips of Imaginisce Paper-"Day in the Life":


 Measure your little ones head, then subtract 1/2 inch
 I measured 20.5 inches, so I did some math and figured out for 4 even pieces would be 5 and 1/8th inch-Then I trimmed them from the 12x4 strips
I used ribbon to attach the pieces, so I trimmed 8 strips of 1/2 inch wide ribbon at 6 inches each


Then I tape down the ribbons to prep for adding my adhesive

I used my Xyron Mega Runner with 1/2 inch adhesive, and ran it down each strip

Now, attach one edge of one of the panels, to the ribbon- in about a little less than a 1/4 of and inch. You basically want enough room for both panels to be attached and a small space in the middle. Attach to all four pieces-on only one side for now. Reserv the other 4 strips of ribbon for later

Now, you want to curl your paper to get the round shape we need. I use the edge of my ruler. And I curl using alternating side of the papers

Now its time to assemble the crown. 

Attach the pieces together, just like this, leaving a little space in the center.

Take one of the left over 4 strips and attach over the top on the inside and press firmly


Trim the edges off

When I go to close the last panel I use a spray can cylinder underneath, so I have a surface to press against.

Now you should be looking like this!

Side view

A little tip when I am making crowns: use a cereal bowl to help prop it up while I am decorating 

voila!

Now I am going to add some stickers from the "Just Be Little Icon". Tip: if the back of a sticker will show-ink it!



I added one sticker strip in the front from the center, and the next in the back trimming it to size.

I then attached a Pom Pom trim-using Imaginisce Hot Glue-best for a heavy trim.

Now for the embellishing!

First we are going to make "Glitter Crepe" ! Grab some crepe paper and your 5 Inch Creative station and run a 12 inch long piece of crepe paper through it. I like to run two to save adhesive (I just trim off the other one and save for another project)


Gently peel back the crepe paper, gently!

now lay across your glitter catcher and start in the center, dousing generously with glitter

Tip: Use an old blush brush to run along both sides to make sure thoroughly coated with glitter

Now fold back and forth in 1/2 inch increments. It should look like this- it may still get a little stuck together but you can just pull it apart.

cut a little half round piece of scrap cardstock and coat with some Xyron glue stick

attach to back of glitter crepe fan

There ya go!

I attached with some hot glue and stared embellishing with This Moment Sticker Stacker:


Add in the Happy Birthday with the Sticker Alphas


and Chipboard:


another Hide and Seek Chipboard birdie

Then added more stickers here...

here...

and here...

and finally a sweet little May Arts Bow

Now what's a Party without a favor? I kept it short and sweet with these cute craft store bought boxes. I spray painted the lids white, ran strips of Memory Lane 12x12 through my 2 inch Xyron Sticker Maker. Then I stamped some of the adorable images form the Childhood memories collection onto white paper circles. Then ran them trough the sticker maker. I attached everything then, ran my mega runner around the lid and attached some May Arts Grossgrain trim. Tip: instead of using just store bought crinkle fill, cut your own using tissue paper and scraps from your project!
Fill with candy and enjoy the Party!






You can see the whole Childhood Memories line from Imaginisce HERE!





11 comments:

  1. This is absolutely stunning! Just stunning! I love it, you are so very talented!!! Thank you for sharing such a great step by step! I can't wait to see all the other amazing things you create this year!

    ReplyDelete
  2. Oh wow! This is fantastic! Love this idea!

    ReplyDelete
  3. Any child would be proud to wear that birthday crown! And the little treat boxes are too sweet!

    ReplyDelete
  4. Wow, so creative! I love the treat boxes!

    ReplyDelete
  5. Wonderful crown, like the
    crepe paper idea. Really
    cute.
    Carla from Utah

    ReplyDelete
  6. very cute....and those treat boxes are great. I love how they turned out. Wonderful job.

    ReplyDelete
  7. Thanks for the detailed instructions on making the crown. I'll have to keep them if/when I get a little grandbaby. I'm so looking forward to making kid things again. It's been a long time since I had a little one around.

    ReplyDelete
  8. wow you are so amazing! Holy moly!!!!

    ReplyDelete
  9. WOW, I love new ideas and tutorials. I hit pay-dirt with yours. Awesome.

    ReplyDelete
  10. love these party decorations - your step by step instructions are so so helpful.
    Love Childhood Memories and Xyron to put it all together!
    :)

    ReplyDelete
  11. Really cute! I love the crown!

    ReplyDelete